Sabba’s Landscaping: The #1 Ocean Acres, NJ Paver Patios Professionals

Before you start to dig, you’ll want to consider the size of the area you will be using for your paver patio. Most homeowners place their patios off the back or side of their home so they can have easy access from the house. Once you’ve chosen a location, you can start to plan the paver pattern and placement. To determine the number of pavers you’ll need, calculate the depth of your site and how many base materials you’ll need.

Once you’ve determined where you want to put the pavers, it’s time to start the installation process. Before laying the pavers, you’ll want to prepare the area by excavating six to eight inches below the ground level. Make sure to grade the area so that it slopes away from the house. Once you’ve done this, you’ll need to add drainage materials such as landscape fabric and 4″ of gravel to the area. Then, add one to two inches of sand to the area.

Another way to customize your paver patio is to use a basket weave pattern. This pattern is derived from an era of old English landscape design. This pattern is known for its vintage flair, and is most commonly used with rectangle pavers. You’ll alternate horizontal and vertical pairs of pavers to create a basket-weave pattern. The end result will have your pavers “disappearing” under the adjacent row.

Another way to properly drain water from your paver patio is by creating a slope. This slope should be one-quarter inch per linear foot of the patio’s surface. Once installed, the natural pull of gravity will help the water flow down and away from your patio. And if you want the water to be completely out, you can place a drainage pipe at the base of your pavers. And remember that drainage pipes are not expensive – they’re typically $0.10 to $0.80 per square foot.

Lastly, you’ll want to add some finishing touches to your paver patio. These finishing touches will add a bit of class and make the space more comfortable. A gazebo and a firepit can add visual interest to your patio, and they can separate seating areas. Make sure you choose pieces of patio furniture that are comfortable and functional. You can even make your paver patio into an extension of your house, if you want to.

Once you’ve decided on the design and materials for your patio, you can choose an edging. Edging can be made of either concrete or brick. Concrete edging is a great choice, as it will help prevent shifting and provide texture. You can also choose to use recycled plastic pavers for your patio, but they’re not as durable as brick or concrete pavers. However, you can’t go wrong with brick pavers if you’re on a budget.

Before you install your pavers, you’ll need to do some compaction work. There are multiple layers of material, so you need to ensure that the layers are smooth and level. You also need to grade the ground well to prevent pooling water and damage. Remember to use white paint when marking the area to ensure that no weeds grow in the area. You should also measure the area with white marking paint, so you can be sure you’ve got enough material.

Next, lay your paver base. Use a rake or a hand tamper to spread out the sand evenly. If you’re not comfortable with hand tamping, you can use a 2-x4 or 2×4 to scrim the base to prevent any unevenness. The base will also serve as a level guide for pavers. Once the base is laid, lay the pavers in a quarter-inch-wide gap.

Adding a fire pit is relatively easy. Depending on how large your fire pit is, you can choose a side or center location for it. This decision depends on the style of your house. Once you’ve laid down the first layer of wall block stones, you’ll be ready to add the fire pit. Most fire pits are circular and measure 36 to 44 inches in diameter. When selecting a fire pit, keep in mind that it must be fire-resistant.

Once you’ve chosen the size of your paver patio, you’ll need to decide what type of base material to use. Crushed stone or limestone gravel is best for this purpose. The gravel should be a few inches thick. The side closest to your house should be at least six inches thick while the side away from the house should be four inches thick. Depending on your state, one inch of gravel per ten feet is usually enough to prevent sloping. Measure from the top of the gravel to the level of the ground and choose the most suitable paver material for your project.